Antifoul Stripping in Gold Coast
Strip layered antifoul from hulls without sandblasting damage or chemical run-off. Serving Surfers Paradise, Southport, Burleigh Heads, Coolangatta and surrounds.
Antifoul Stripping for Gold Coast customers
Decades of antifoul builds up on yacht and commercial hulls, eventually requiring full strip-back. Sandblasting damages gelcoat and risks substrate fatigue. Chemical strippers run off into the marina. Dry ice blasting strips layered antifoul down to gelcoat or original primer without abrasive scoring or hazardous run-off — making it possible to fully restore a hull’s protective system.
For customers across Gold Coast — from Surfers Paradise, Southport, Burleigh Heads to Coolangatta — we operate as the Queensland arm of the wider Dry Ice Blasters network. Antifoul Stripping is one of the most-requested services in this region.
Why Gold Coast customers pick dry ice for antifoul stripping
Gelcoat-safe
Layered antifoul removed without scoring fibreglass gelcoat or aluminium.
No run-off
No chemical paint stripper into marina water — fully dry process.
Survey-ready surface
Reveals osmotic blistering or hull defects under the antifoul layer.
Faster than sanding
Layered build-up that takes weeks to sand can be removed in days.
How a antifoul stripping job runs in Gold Coast
- 1
Hard-stand & containment
Vessel on hard-stand, lower-area containment to capture antifoul flakes.
- 2
Phased strip
Worked top-to-bottom, port-to-starboard — pressure tuned to break antifoul layers without gelcoat damage.
- 3
Surface check
Hull inspected for blistering, voids, repair needs before re-coating.
Antifoul Stripping pricing in Gold Coast
Final pricing depends on condition, scope and travel. Gold Coast metro is in our zero-surcharge service zone.
Production lines, marine vessels, restoration zones, multi-day commercial work.
Estimate this job- Mobile service across Surfers Paradise, Southport, Burleigh Heads and surrounds
- Public liability $20m + insurance certificates available
- Gold Coast-specific 24-hour quote turn-around
Antifoul Stripping Gold Coast — FAQs
Will it damage gelcoat?
No — pressure is calibrated to break antifoul layers without crazing or scoring gelcoat. Surface remains receptive to fresh antifoul or barrier coat.
Do you handle the hull osmotic check?
Cleaning typically reveals osmotic issues — we coordinate with shipwrights to address these before re-coating.
Is there marina-side run-off compliance?
No water or chemical run-off — hull-stripping flake is captured with containment for proper disposal.
Do you cover Surfers Paradise and Southport?
Yes — both are within our Gold Coast service area. We cover a 60km radius from the Gold Coast hub at no travel surcharge.
What's the lead time for antifoul stripping in Gold Coast?
Our typical Gold Coast lead time for antifoul stripping is 3–7 business days. Restoration and insurance work can usually be expedited within 24–72 hours.
What does antifoul stripping cost in Gold Coast?
Antifoul Stripping jobs in Gold Coast typically run between $1,800 and $8,500 ex-GST depending on condition and access. Use the calculator for a postcode-specific estimate.
Other services in Gold Coast
Hull & Deck Cleaning
Strip waterline scum, deck stains and salt-baked grime — without scrubbing the gelcoat to ruin.
Bilge & Engine Room
Strip oil, salt and grime from bilges and engine rooms without flooding the boat.
Fire & Smoke Damage
Strip soot from timber, masonry and contents without sanding, sandblasting or chemical washing.
Ready to book antifoul stripping in Gold Coast?
Open the calculator for an instant range or request a quote — we'll be in touch within 24 hours.
Or talk to us directly
- 0478 111 024
- office@dryiceblasters.com.au
- Mon–Fri 7am–6pm · Sat 8am–2pm · Sun by appointment