Mold Remediation in Sydney
Remove mold from timber, masonry and HVAC without chemicals — fast, documented, IICRC-aligned. Serving Sydney CBD, Eastern Suburbs (Bondi, Vaucluse, Double Bay), Inner West (Marrickville, Alexandria, Mascot), North Shore (Mosman, Lane Cove, Chatswood) and surrounds.
Mold Remediation for Sydney customers
Mold growth on structural timber, masonry or inside HVAC ductwork can’t be wiped or chemically treated reliably — soft surfaces hold spores deep inside their grain. Sanding generates dust; biocides leave residue and don’t guarantee removal; replacement is expensive. Dry ice blasting physically removes mold growth from porous surfaces in a single pass, without saturating the substrate or introducing new chemical loads. It is IICRC-aligned for use in restoration workflows and produces documentation suitable for insurance claims.
For customers across Sydney — from Sydney CBD, Eastern Suburbs (Bondi, Vaucluse, Double Bay), Inner West (Marrickville, Alexandria, Mascot) to North Shore (Mosman, Lane Cove, Chatswood) — we operate as the New South Wales arm of the wider Dry Ice Blasters network. Sydney is a three-shape market for dry ice cleaning. East and North Shore: premium daily drivers and concours-grade engine bays — Porsche, Ferrari, Aston, classic American iron — where owners want factory-finish without wash bays or chemicals on their driveway. Inner West and South Sydney: warehouse-converted restoration shops, post-fire and post-flood insurance work in Federation terraces (Paddington, Glebe, Newtown), and food production sites in the Alexandria/Mascot industrial belt. Greater Western Sydney: trade work for body shops, undercarriage cleans for utes and 4WDs, and industrial equipment scopes from Smithfield through Silverwater to Eastern Creek. We work Sydney from the Central Coast via the M1 — no offshore logistics, no chemical disposal compliance, no overnight wait for water dry-down before a sensitive surface goes back into service.
Why Sydney customers pick dry ice for mold remediation
Removes — not just kills — the mold
Physical removal of spores and hyphae rather than chemical inactivation. Surfaces test cleaner.
No chemical residue
No biocides to off-gas, no rinse step, no occupant exposure to cleaning chemistry.
Saves the substrate
Timber framing and decorative masonry can be saved instead of replaced.
HVAC-suitable
Cleans ductwork interiors, AHU coils and plenum surfaces without water damage to insulation.
How a mold remediation job runs in Sydney
- 1
Containment & assessment
We establish containment, set HEPA negative-pressure where required, and map affected areas.
- 2
Dry ice blast
Surface mold and embedded growth removed by pellet impact; HEPA vacuum captures particulate.
- 3
HEPA vacuum & wipe
Final HEPA vacuum and antimicrobial wipe-down per IICRC S520 expectations.
- 4
Verification & report
Post-remediation visual inspection and (optional) clearance sampling, with full documentation pack.
Mold Remediation pricing in Sydney
Final pricing depends on condition, scope and travel. Sydney metro is in our zero-surcharge service zone.
Production lines, marine vessels, restoration zones, multi-day commercial work.
Estimate this job- Mobile service across Sydney CBD, Eastern Suburbs (Bondi, Vaucluse, Double Bay), Inner West (Marrickville, Alexandria, Mascot) and surrounds
- Public liability $20m + insurance certificates available
- Sydney-specific 24-hour quote turn-around
Mold Remediation Sydney — FAQs
Is dry ice cleaning IICRC-recognised for mold?
Yes — dry ice blasting is widely used as a physical removal step within IICRC S520-aligned workflows. We work alongside hygienists where required.
Do you handle insurance documentation?
Yes. We provide before/after photo logs, area maps and process records suitable for builder, insurer and hygienist sign-off.
Can it be done with occupants in the building?
For minor jobs in commercial settings yes, with containment. For larger residential remediation we recommend short-term relocation.
Do you handle the dehumidification first?
Cleaning happens after structural drying. We coordinate with restoration drying contractors.
Do you cover Sydney CBD and Eastern Suburbs (Bondi, Vaucluse, Double Bay)?
Yes — we service Sydney CBD and Eastern Suburbs (Bondi, Vaucluse, Double Bay) mobile from our West Gosford hub on the Central Coast. Both sit inside our regular 80km Sydney mobile-service radius at no travel surcharge.
What's the lead time for mold remediation in Sydney?
Mold Remediation lead time in Sydney is typically 3–7 business days, booked into the M1 corridor calendar from West Gosford. Restoration and insurance work can usually be expedited within 24–72 hours.
What does mold remediation cost in Sydney?
Mold Remediation jobs in Sydney typically run between $1,800 and $8,500 ex-GST depending on condition and access. Use the quote form for a postcode-specific estimate.
Other services in Sydney
Fire & Smoke Damage
Strip soot from timber, masonry and contents without sanding, sandblasting or chemical washing.
Water Damage Equipment Recovery
Recover machinery, motors and panels after flooding without further moisture damage.
Soot Removal (Sensitive Surfaces)
Lift soot off heritage timber, painted walls, electronics and decorative surfaces without damage.
Ready to book mold remediation in Sydney?
Send a brief for an instant range or request a quote — we'll be in touch within 24 hours.
Or talk to us directly
- 0478 111 024
- office@dryiceblasters.com.au
- Mon–Fri 7am–6pm · Sat 8am–2pm · Sun by appointment